Reverse osmosis cleaning equipment generally includes fiberglass membrane shell, cleaning water tank, fine filter, cleaning circulation pump, pressure gauge, thermometer, valve, sampling point, pipeline, etc. The volume of the cleaning tank should ensure the requirements of the displacement water quantity in the connection of hoses, filters, pipelines and RO pressure vessels.

Direct drinking water facilities are usually built at the entrance of residential areas or parks, so that people can drink pure water at any time without installing special pipes. Direct cash purchase, credit card purchase water.

The ion-exchange resin in electrolyte solution can remove various anions and cations in water, which is an irreplaceable means in the process of preparing pure water. Ion-exchange are divided into cation-exchange, anionic-exchange, mixed ion-exchange and polished ion-exchange.

EDI is a pure water manufacturing technology which combines ion exchange technology, ion exchange membrane technology and ion electromigration technology.
The desalting rate of EDl facilities can be as high as 99%. If the initial desalting of water is performed with reverse osmosis equipment prior to EDI, ultra-pure water with resistivity of up to 15MQ·CM can be produced during EDI desalting.

usually set after the pressure filter, used to remove the dense particles in the liquid, in order to meet the needs of the following process on the water. Sometimes it is also set at the end of a complete water treatment system to avoid dense microparticles entering the finished water.

The reverse osmosis membrane can trap various inorganic ions, colloidal substances and macromolecular solutes in the water, so as to obtain net water. It can also be used for preconcentration of macromolecular organic solution.

Reverse osmosis technology is usually used in seawater, brackish fresh water; Water softening treatment; Wastewater treatment and purification, concentration, separation of food, pharmaceutical industry and chemical industry.

Sedimentation tank is a kind of structure used to remove suspended solids from water by sedimentation. Sedimentation tanks are widely used in wastewater treatment. According to the direction of water flow in the pool, it can be divided into three kinds: horizontal flow, vertical flow and radial flow.

A new automatic solid-liquid separation equipment for squeezing and dewatering sludge is realized through the strong extrusion pressure caused by the change of screw diameter and pitch and the tiny gap between the movable ring and the fixed ring.

It integrates the dosing box, metering pump (diaphragm pump) and automatic control system, that is, it is installed on a base, and connects the outlet of the metering pump (plunger pump) with the dosing pipe, the inlet and outlet of the metering box with the water inlet pipe, etc.,

It is treated with chlorination and ultraviolet oxidation sterilization and discharged. The use of self-developed automatic chlorination device, and with residual chlorine value control system, real-time display of residual chlorine value, only need to add once a month, the solid chlorine particles into the chlorine box, chlorine in the box in real time displayed on the LCD screen, and with chlorine shortage alarm reminder function.

The core process of LXDS series equipment adopts multiple sewage treatment technologies such as compound disinfection, oxidation disinfection, ultraviolet disinfection and multi-effect filtration to effectively remove microorganisms, organic matter and chroma in medical wastewater. High degree of automation, low operating cost, can realize PLC unattended automatic control.

Microbubbles are used to bond suspended floc, which rises to the water surface together with the microbubbles to form scum and remove the suspended floc.
It is mainly solid-liquid separation, and can reduce COD, BOD, chroma, etc.

The equipment can realize the uninterrupted continuous monitoring of water indicators, monitoring time can be adjusted according to the current quality of the quality of the monitoring week or monitoring interval. At the same time, the standard water samples can be retained to save real-time monitoring data and upload data to the industry control center and data management platform.

Features
. Polarography electrode to test the D.O., which is suitable for low concentration oxygen test. Measurement precision: μg level.
. Transmitter and handset seperated, and transmitter can work alone.
.Transmitter adopts waterproof configuration, with waterproof level achieves IP65, which is more convenient for measurement.

Using the scattered light method, the light emitted by the detector light source (measured light) will reflect when it encounters the surface of suspended objects suspended in the measured water. The optical detector set at an Angle of 130 degrees from the light source can detect the reflected light (scattered light). Turbidity is measured by the intensity of the detected scattered light and the concentration of suspended matter in the water.

Features
● Transmitter integrated with sensor
● Variable frequency exciting power and resonance circuit
● Unique grab sample by signal
● Non-electrode measurement
● MCU and special interface integrated circuit
● Fully digital sample grab, calculation and display
● High accurate temperature compensation
● Real time concentration display and long distance transmission
● Plastic sealed enclosure
● Normal operation even in harsh industrial environment

Features
● Transmitter integrated with sensor
● Variable frequency exciting power and resonance circuit
● Unique grab sample by signal
● Non-electrode measurement
● MCU and special interface integrated circuit
● Fully digital sample grab, calculation and display
● High accurate temperature compensation
● Real time concentration display and long distance transmission
● Plastic sealed enclosure
● Normal operation even in harsh industrial environment

Features
. Advanced embedded  MCU technology
. SMT and integrative design
. Rugged cast aluminum enclosure
. Language: English
. Simultancous display of multtiparameters
. Automatic or manual temperature compensation
. Unique 4-wire measuring technology
. Two analog outputs and two alarm relay outputs
. CAN bus communication
. Large datalog and history curve trackable

This product is a compound quaternary amine salt bactericidal algae-killing agent, with high efficiency, broad spectrum, low toxicity, fast and durable efficacy, strong penetration, easy to use, suitable for a wide range of temperature and pH value.

The main components of corrosion inhibitor for high temperature acidification are organic amines. This product is composed of aldehyde-amine ketone condensation as the main component and other surfactant components.

The scale inhibitor is composed of a variety of organic phosphonic acids, special surfactants, synergists, etc., which can chelate Ca2+ and Mg2+ in water and inhibit the formation of scale through lattice distortion. It has good chelating and dispersing effect on calcium carbonate, calcium sulfate and calcium phosphate in water. The scale inhibitor has the characteristics of high temperature resistance, alkali resistance, salt resistance, stability under oil reservoir conditions and low dosage.

First, product performance
Wastewater decolorizing agent is a cationic quaternary ammonium salt type polymer color removal flocculant, which is safe, non-toxic and has good hydrolysis stability. It can mix and condense anionic water-soluble substances such as pigments dissolved in dye wastewater (especially red wastewater which is the most difficult to treat) and interface active agents ......

The granulation and coagulation technology converts the primary particles in water into dense granulation through chemical force, volumetric force and shear force.
1. Simple process, small footprint, convenient operation, high degree of automation.
2. Does not produce sludge, save sludge concentration and dehydration system.
3. Synchronously or step by step removal of high-priced metal ions, while effectively reducing organic matter and suspended matter.

Bactericidal Algaecide
Defoaming Agent

Regulating Valve,Check Valve,Stop Valve,Gate Valve,Plastic Valve,All-Welded Ball Valve

Mechanical Diaphragm Metering Pump, Vertical Multistage Centrifugal Pump, Submersible Sewage Pump, Pipeline Circulating Pump, Horizontal Multistage Centrifugal Pump ,Self-aspirating Fluid Mixing Pump,

Inclined Tube , Spherical Packing, Fiber Bundle, Comet Filter Material, Activated Carbon, Ceramic Filter , Ferromanganese , Fiber Ball, Pipeline Filter, UV Sterillizer ,Resin Catcher , Pipe Ejector Agitator , Water Dispenser, Water Cap, Cloth Bag Filter , Spiral Aerator, Disk Aerator ,Tube Aerator , Plate Aerator

Also known as Membrane Bio-Reactor, is a new type of water treatment technology which is a combination of membrane separation unit and biological treatment unit. The membrane structures used are mainly flat membrane and hollow fiber membrane.
Ultrafiltration membrane is a kind of microporous filtration membrane with uniform pore size and rated pore size range of 0.01-0.4 micron.

UF Membrane
RO Membrane